Jaspertronics™ OEM Lamp & Housing for The Sharp XR-30X Projector with Phoenix bulb inside - 240 Day Warranty
1 In Stock! Same Day Shipping Through 3PM CST! Need more? Call today @ 888.391.5596You are viewing a brand new original lamp designed for your projector. It is the same lamp that was originally installed in your projector.
The Sharp XR-30X-LAMP replacement projector lamp & housing module is a genuine original replacement part for select Sharp projectors. It has a Genuine Original Lamp Inside*.
Lamp Specifications |
|
|---|---|
| Specifications | Data |
| Product Code | XR-30X |
| Part Type | Lamp and Housing |
| Warranty | Industry Leading 240 Days |
| Condition | New |
| Lamp Type | Phoenix - SHP110 |
| Power | DC 220w |
| Discounts Available | Volume, Educational, Government, Military, Wholesale Accounts |
The Sharp XR-30X-LAMP replacement projector lamp & housing module is designed to replace bulbs in many Sharp projectors.
Included with every Jaspertronics™ OEM projector lamp module that we sell is our industry leading 240 Day Guarantee backed by our team of knowledgable service technicians with over 25 years of hands on experience in the projector field. If you order a projector lamp from Jaspertronics™ and you are not satisfied for any reason, you can send back the projector lamp for refund or exchange.
* "Genuine Original Lamp Inside" refers to the OEM (original equipment manufacturer) bare projector bulbs - made by Philips, Osram, Ushio, Iwasaki, Phoenix, and Panasonic - these manufactures design and create genuine original parts for all major projector brands. Genuine original bulbs are manufactured to the exact specifications as the lamp that came with your projector.
While we are working to ensure each image we have posted is accurate, there may be items with an incorrect or missing image. Please be sure you are ordering the correct model.
We Also Recommend
QUESTIONS & ANSWERS
Ask a Question-
How do I change the XR-30X bulb for my projector?
From Pages 51 & 52 in the user manual:
https://global.sharp/products/data_projector/xr40x/pdf/XR40X-XR30X-XR30S_ex2_en.pdf
Do not remove the lamp unit from the projector right after use. The lamp and parts around the lamp will be very hot and may cause burns or injury.
Do not touch the glass surface of the lamp unit or the inside of the projector.
To avoid injury to yourself and damage to the lamp, make sure you carefully follow the steps below.
Do not loosen other screws except for the lamp unit cover and lamp unit.
1. Press STANDBY/ON on the projector or STANDBY on the remote control to put the projector into standby mode. • Wait until the cooling fan stops.
2. Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour).
3. Remove the lamp unit cover. •Turn the projector over. Loosen the user service screw that secures the lamp unit cover. Remove the lamp unit cover.
4. Remove the lamp unit. • Loosen the securing screws from the lamp unit. Hold the lamp unit and pull it in the direction of the arrow. At this time, keep the lamp unit horizontal and do not tilt it.
5. Insert the new lamp unit. •Press the lamp unit firmly into the lamp unit compartment. Fasten the securing screws.
6. Replace the lamp unit cover. • Align the tab on the lamp unit cover and place it while pressing the tab to close it. Then tighten the user service screw to secure the lamp unit cover.
Note: If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector.7. Reset the lamp timer. • While simultaneously holding down MENU/HELP, ENTER and R on the projector, press STANDBY/ON on the projector. • “LAMP 0000H” is displayed, indicating that the lamp timer is reset.